DL-EPP15-PA12 · ANSI/SLAS 127.76 × 85.48 MM
15-Well 5 mL Conical & Snap-Cap Tube Rack
16.8 × 57 mm 5 mL tubes (5 × 3 grid with open-lid clearance)
Opentrons’s standard 4-in-1 rack jumps straight from 2 mL to 15 mL tubes, forcing deep P300 plunges or excess dead volume in 15 mL conicals. This 15-well rack holds 5 mL tubes at 21 × 24 mm spacing so hinged snap-caps fold back cleanly without blocking neighboring wells.
Selective Laser Sintering (Vapor-De-Powdered) (±0.15 mm): Resistant to alcohols, aqueous buffers, DMSO, and acetonitrile splashes; wipe down with 70% ethanol or 10% bleach.
INCLUDED ROBOT SETUP FILES (TEST BEFORE YOU BUY)
Dimensional & Coordinate Specifications
| Opentrons Load Name | datum_15_tuberack_eppendorf_5ml_snapcap |
|---|---|
| Robot Compatibility | Opentrons Flex & Opentrons OT-2 (ANSI/SLAS 1-2004) |
| Well Count & Pitch | 15 wells · Single-channel P300 / P1000 master-mix layout (21 × 24 mm pitch) |
| Zone 1: 5 mL Conical Tube (16.8x57 mm) | 5×3 · Bore Ø17.35 mm · A1/Start (21.88, 66.74) mm |
| Rack Body / Floor Z | 42 mm rack height · 5 mm datum floor |
Compatible Vials & Engineering Notes
- Eppendorf Tubes 5.0 mL (snap-cap and screw-cap, 16.7 mm OD)
- Axygen, Sarstedt, and Fisherbrand 5 mL conical centrifuge tubes
- Calibrated V-bottom Z datum minimizes master-mix dead volume with standard length P200/P300 and P1000 tips.
- 37.0 mm bore depth stabilizes conical tubes vertically without requiring bottom adapters.